Dometic engineers have spent two years completely redesigning and reengineering one of the most popular and most imitated RV air conditioners.
WELCOME TO THE ALL-NEW BRISK II!
A Revolution in RV A/C Technology!
Cooler ... stronger ... quieter ... lighter ... the Brisk II puts it all together for an all-new, best-in-class RV A/C, starting with 15 percent increased air flow and improved cooling capacity!
Reengineered where it matters
Heavy-duty motor support brackets, reinforced mounting screw holes, and thick structural EPP foam housings all helpcreate a sturdier, more reliable A/C unit. The compressor and motor are mounted with rubber isolation pads and grommets to reduce vibration.
Durable design - SLEEK SHROUD
Sleek new shroud offers better ventilation, more strength and superior aerodynamic performance.
Used by automotive and aircraft engineers, EPP (Expanded Poly-propylene) foam makes Brisk II lighter, better insulated, and more aerodynamic, while adding structural integrity and reducing noise and vibration.
ALL-NEW BASE PAN
Three-inch deep-drawn G90 carbon steel has an extra smooth powder-coated finish for long-lasting durability against rust and corrosion. Ten percent greater strength and rigidity is achieved through a heavier gauge metal pan with ribbed areas and reinforced vent holes. More platform stability adds to the life cycle.
SMALLER CARBON FOOTPRINT
Smart design, tighter specification allowances, and improved materials create energy efficiencies that reduce operating costs and environmental footprint while improving fit and finish.
Nominal capacity, BTU/hr: 13500
Installation type: Non-ducted or Ducted
Electrical rating: 115V AC, 60 Hz, 1Ph
Compressor-rated load amps: 12.4
Fan motor-rated load amps: 2.7
SCFM, high-speed max./min.: 300/350
Heater amps/watts @ 120V AC: 13.7/1,530
Refrigerant 410A (oz.: 16
Minimum wire size: 12 AWG copper up to 24 feet. For distances over 24 feet consult the National Electrical Code
AC circuit protection: (User Supplied) 20 amp time delay fuse or 20 HCAR circuit breaker
DC circuit protection: (User Supplied) Installation must comply with national, state, provincial and/or local electrical codes